SBE-G Serie

SBE-G Serie


Technical Documents

Options

> Different casing color,
> Other tube wall thicknesses and fin spacing on request,
> Three phase 400V 3~ 50Hz fan,
> Please keep in touch with our sales department about your special needs that are not mentioned in the catalogue.

Accessories

> Hot gas defrost in coil and drip tray,
> Insulated drip tray,
> Casing made of stainless steel,
> Epoxy resin coated aluminium fins,
> Fan cable heaters,
> Drain line cable heater.

SBE-G Serie

Water-Glycol Standard Unit Coolers

Evaporator Coil
> Copper tubes Ø1/2”-Ø5/8”,
> Fins made of aluminium,
> Fin spacings are 4-6-8-10 mm,
> Header inlet and outlet tube connections made of steel,
> Admissible pressure Ps=24 Bar.

Casing
> Galvanized steel sheet painted to RAL 9016 (traffic white)

Fans
> Low-noise axial fans with maintenance free motors,
> Protection class IP 44/54, single phase 230V 1~ 50Hz,
> Constructions insulation material class F/B, admissible temperature -30°C up to +40/+55°C,
> In case of long periods of non operation the motors must be operated every month for 2 hours,
> The integral thermo contacts (thermistors) must be used as motor protection,
> At low ambient temperatures and different air resistance the power consumption will increase.

Sound Specifications
> The sound pressure levels are calculated according to EN 13487.

Defrosting

> Electrical defrost as HT for (+2°C/-5°C) or LT type for (–2°C/–25°C) as optional,
> Hot gas defrosts without tubing inside of coil and drip try, without non-return valve,
> Water defrost.

Capacity
> The nominal capacities calculated according to Eurovent (EN 328) standards that refer to  SC6-SC7 conditions,