SED Serie
Options
> Two refrigerant circuit,> Different casing color,
> Three phase 400V 3~ 50Hz fans,
> Please keep in touch with our sales department about your special needs that are not mentioned in the catalogue,
Accessories
> Repair Switch.
SED Serie
Dry/Wet-Dry Coolers
Evaporator Coil
> Copper tubes Ø1/2”, Ø5/8",
> Fins made of aluminum,
> Fin spacing is 2,1-2,5 mm,
> Header inlets and outlets tubes connections made of steel,
> Admissible pressure Ps = 32 Bar.
Casing
> Galvanized steel sheet painted to RAL 7032 (pebble gray),
> Horizontal or vertical type production.
Fans
> Low axial fans with maintenance free motor,
> Protection class IP44/54, single phase 230V 1~ 50Hz, three phase 400V 3~ 50Hz.
> Constructions insulation material class F/B, admissible temperature -40°C up to +60/+65°C,
> Maximum start up recommended for motors is 6 per hour,
> The axial condensers are designed for outdoor operation with no external pressure drops being considered,
> n case of long periods of non operation the motors must be operated every month for 2 hours,
> The integral thermo contacts (thermistors) must be used as motor protection.
> Copper tubes Ø1/2”, Ø5/8",
> Fins made of aluminum,
> Fin spacing is 2,1-2,5 mm,
> Header inlets and outlets tubes connections made of steel,
> Admissible pressure Ps = 32 Bar.
Casing
> Galvanized steel sheet painted to RAL 7032 (pebble gray),
> Horizontal or vertical type production.
Fans
> Low axial fans with maintenance free motor,
> Protection class IP44/54, single phase 230V 1~ 50Hz, three phase 400V 3~ 50Hz.
> Constructions insulation material class F/B, admissible temperature -40°C up to +60/+65°C,
> Maximum start up recommended for motors is 6 per hour,
> The axial condensers are designed for outdoor operation with no external pressure drops being considered,
> n case of long periods of non operation the motors must be operated every month for 2 hours,
> The integral thermo contacts (thermistors) must be used as motor protection.
